|
|
Bob,
It is my understanding that the injector test mode works on the 2-rotor models only, not the 3-rotor model. Something to do with the injector staging relay used on the 3-rotor units. If you hear the injectors click when you press the primer (store) button, then I would conclude that they're good. Concerning the primaries, you could connect one at a time and press the store button and listen to see if it responds. Then repeat the process for the other two. I don't think this works on the secondaries.
Mark
On Jan 13, 2008 12:04 AM, < BMears9413@aol.com> wrote:
Ok guys...my turn for help,
I hooked up a real battery tonight. no smoke..no popped breakers...no blown
fuses....EM2 lights right up and all temps are displaying accurate, along with
pressures. EM2 shows NOP on the RPM until I power up the EC2, as it should. I
tried the test mode of the injectors and the coils. I can hear the injectors
when I use the primer function, but I get nothing on the continuous injection or
the continuous coils. So mode 0 is working for prime, but I get nothing on mode
1 and 9. Its late, Im tired, and I havent checked anything with a test light
yet. will start that tomorrow. All grounds are hooked up and grounding. All
plugs in tight on the EM2. EC2, and control panel. Harness built by Bob White
so I dont think anything is messed up there. Am I overlooking anything
simple ?????
Bob Mears
Supermarine Spitfire
|
|