|
|
Mark,
Thanks, but I will probably go with the Hushpower as well.
I am really interested in hearing some performance numbers for your
plane as soon as you have some??!! I am expecting it to be a real rip snorter
with that clean Lancair airframe and hairy chested 3 rotor!
Climb rate, with engine numbers, cruise, with engine numbers, GPH??
Bill
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of Mark Steitle
Sent: Saturday, January 05, 2008
10:06 PM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Re: Dennis'
Muffler
Bill,
I forgot to mention that once I have the Hushpower II installed, you can have
the "auger" muffler if you want it. It isn't the quietest on
the block, but it is lots quieter than an open header rotary.
Mark
On Jan 5, 2008 8:58 PM, Mark Steitle <msteitle@gmail.com> wrote:
Bill,
The body of the Hushpower II Resonator is only 12" long. Cut the
inlet down to about 1/2" and it should fit right in there.
Mark S.
On Jan 5, 2008 8:32 PM, Bill Bradburry < bbradburry@bellsouth.net>
wrote:
Anybody
know where I can find a muffler compactor? I can tell I am going to need
one :>)
Bill
B
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
On Behalf Of Mark Steitle
Sent: Saturday, January 05, 2008
9:25 PM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Re: Dennis'
Muffler
Bill,
Yes, the "auger muffler" is still hanging in there after 20 hrs of
ritualistic torture. It looks like it has what it takes to "take a
licking and keep on ticking". The only problem is that it isn't as
quite as I had hoped. So, I have decided to try a Hushpower II resonator.
And it WILL be inside the cowl. I will not hang a muffler (even a pretty
SS one) under the belly of my airplane. If you do that to your Legacy I
will have to rip it off and beat you with it.
Mark S.
(Where there's a will, there's a way.)
On Jan 5,
2008 2:34 PM, Bill Bradburry <bbradburry@bellsouth.net> wrote:
Thanks,
Mark.
Are you
going to hang it under the plane or try and install it inside the cowl?
How is your exhaust insert holding up? Has it blown out yet? I
assume that the largest inlet for the resonator is 2.5… I didn't see
anything larger. I suppose I will have to neck mine down, but that will
add to the length, so I may have to hang it under the plane.
Bill
B
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
On Behalf Of Mark Steitle
Sent: Thursday, January 03, 2008
9:33 AM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Re: Dennis'
Muffler
Bill,
I just ordered one. Got it off ebay. Here is the description...
2.50" HUSHPOWER II RESONATOR - FLOWMASTER 12512300
Mark S.
20.5 hrs
On Jan 3,
2008 8:06 AM, Bill Bradburry <bbradburry@bellsouth.net> wrote:
Did
anyone happen to get the part number of Dennis' muffler at Tracy's fly in? I seem to remember that
it was a resonator, not a muffler. I would like to see if I can find one
but have not found anything that looks like the one he has. My exhaust is
3" and his is 2 ½ , so I will either have to find a slightly larger size,
or neck my exhaust down to go through it.
Help
would be appreciated…my engine is LOUD!
Thanks,
Bill B
|
|