|
|
Hi Al,
Tracy's EC2 uses 35BTDC static timing as a starting point. The
computer changes the actual timing to something else.
Bob W.
On Mon, 17 Sep 2007 23:35:00 EDT
WRJJRS@aol.com wrote:
In a message dated 9/17/2007 5:23:02 PM Pacific Standard Time, ALVentures@cox.net writes:
I have all the latest updates on the EC2, and I have double checked the static timing set at 35o BTDC. From that point on the EC2 is handling the timing curve with rpm and MAP.
Al, was 35° BTDC Tracys suggested timing? That sounds like too much lead to me. I thought the base timing was closer to 25° than 35°. Not certain, but that is the way I remember it. I think Lynn metioned running 28° total. Just the way I remember it I certainly could be wrong.
Bill Jepson
************************************** See what's new at http://www.aol.com
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/
|
|