X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from rg4.comporium.net ([208.104.2.24] verified) by logan.com (CommuniGate Pro SMTP 5.1.11) with ESMTPS id 2277349 for flyrotary@lancaironline.net; Tue, 21 Aug 2007 22:15:51 -0400 Received-SPF: neutral receiver=logan.com; client-ip=208.104.2.24; envelope-from=jewen@comporium.net Received: from 208-104-86-166.lnhe.2wcm.comporium.net (HELO engineer1) ([208.104.86.166]) by rg4.comporium.net (MOS 3.8.4-GA FastPath queued) with SMTP id ABN40308; Tue, 21 Aug 2007 22:15:14 -0400 (EDT) Message-ID: <000701c7e462$45450e70$6405a8c0@cooleygroup.local> From: "Joe Ewen" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: Plugging Oil Injector Ports Date: Sun, 19 Aug 2007 09:56:33 -0400 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=response Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.3138 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3138 X-Junkmail-Status: score=10/50, host=rg4.comporium.net X-Junkmail-SD-Raw: score=unknown, refid=str=0001.0A090207.46CB9C31.0119,ss=1,fgs=0, ip=208.104.86.166, so=2007-03-13 10:31:19, dmn=5.3.14/2007-05-31 Hi Bill, The thread is M10-1.25. I took Kelly's suggestion of using the flex plate bolts. They fit perfectly. Joe ----- Original Message ----- From: "Bill Schertz" To: "Rotary motors in aircraft" Sent: Sunday, August 19, 2007 8:32 AM Subject: [FlyRotary] Re: Plugging Oil Injector Ports >I can't remember the thread size, but it was readily available as a metric >bolt. I cut off a bolt, used a dremel tool with abrasive wheel to cut a >screwdriver slot in one end, and plugged them that way (makes it flush). > Bill Schertz > KIS Cruiser #4045 > ----- Original Message ----- > From: "David Staten" > To: "Rotary motors in aircraft" > Sent: Tuesday, August 14, 2007 10:26 PM > Subject: [FlyRotary] Re: Plugging Oil Injector Ports > > >> jewen@comporium.net wrote: >> >>> What is the thread size for plugging the oil injector ports? Does anyone >>> have a source? >>> >>> Thanks, >>> Joe >> >> ugh... had i known i'd have measured. I was at the hangar tonight. If you >> have an oil injector laying around, take that with you to a bolt shop. >> They can measure and get it for ya. Length wise, dont need too long. 10 >> mm is fine lengthwise. >> >> Dave >> >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: >> http://mail.lancaironline.net:81/lists/flyrotary/List.html >> > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: > http://mail.lancaironline.net:81/lists/flyrotary/List.html