X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from sccrmhc12.comcast.net ([63.240.77.82] verified) by logan.com (CommuniGate Pro SMTP 5.1.11) with ESMTP id 2272028 for flyrotary@lancaironline.net; Sun, 19 Aug 2007 08:32:57 -0400 Received-SPF: none receiver=logan.com; client-ip=63.240.77.82; envelope-from=wschertz@comcast.net Received: from wschertzpc (host-69-146-29-62.static.bresnan.net[69.146.29.62]) by comcast.net (sccrmhc12) with SMTP id <2007081912320801200d6pj4e>; Sun, 19 Aug 2007 12:32:18 +0000 Message-ID: From: "Bill Schertz" To: "Rotary motors in aircraft" References: In-Reply-To: Subject: Re: [FlyRotary] Re: Plugging Oil Injector Ports Date: Sun, 19 Aug 2007 07:32:06 -0500 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=response Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Windows Mail 6.0.6000.16480 X-MimeOLE: Produced By Microsoft MimeOLE V6.0.6000.16480 I can't remember the thread size, but it was readily available as a metric bolt. I cut off a bolt, used a dremel tool with abrasive wheel to cut a screwdriver slot in one end, and plugged them that way (makes it flush). Bill Schertz KIS Cruiser #4045 ----- Original Message ----- From: "David Staten" To: "Rotary motors in aircraft" Sent: Tuesday, August 14, 2007 10:26 PM Subject: [FlyRotary] Re: Plugging Oil Injector Ports > jewen@comporium.net wrote: > >> What is the thread size for plugging the oil injector ports? Does anyone >> have a source? >> >> Thanks, >> Joe > > ugh... had i known i'd have measured. I was at the hangar tonight. If you > have an oil injector laying around, take that with you to a bolt shop. > They can measure and get it for ya. Length wise, dont need too long. 10 mm > is fine lengthwise. > > Dave > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: > http://mail.lancaironline.net:81/lists/flyrotary/List.html >