|
No, Wagner actually have bends from 15 deg to 180 deg as
stock, such as 45, 33, 120, 90, etc. You can get
specialized bends but you wouldn't want to pay for that.
Look at their catalog under "elbows" and you can probably find
the size and bends necessary for you want. They generally have them in
tubing size (more limited selection) but, almost anything in pipe size.
They generally have schedule 40 pipe and sometimes even thinner wall schedule 20
pipe in stainless steel.
But, if they don't have it, I agree, cheaper to get a length
of SS tubing and take it to a muffler shop.
Ed
----- Original Message -----
Sent: Saturday, August 11, 2007 12:43
PM
Subject: [FlyRotary] RB Wagner for
Exhaust system
Right, Mark
I used Wagoner 0.11 wall ( 304SS pipe) , with over 400
hours of run time and still looking good. It was considerably
cheaper than other places.
Ed
ED:
Did you buy a 20 ft. rail and then cut and take it to a local
muffler shop for bending?
dl
Get a sneak peek of the all-new AOL.com.
|