Received-SPF: none
 receiver=logan.com; client-ip=63.240.77.81; envelope-from=rlwhite@comcast.net
Date: Tue, 7 Aug 2007 11:30:58 -0600
From: Bob White <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Spark plug wires.
Message-Id: <20070807113058.2a043313.rlwhite@comcast.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit


I have about a dozen Magnecor connectors for LS-1 coils, a dozen
spark plug connectors, and a length (maybe 10 ft) of 2.5 mm FM 200T of
spark plug wire.  Long ago I was looking into making custom spark plug
wires as an addition to making the other cables.  First I haven't
figured out how to put these things together.  The wire is an extremely
tight fit and I'm not sure what crimper is needed.  Second, Magnecor
will make the wires up at a very reasonable price.  

So I have this box of stuff I'm never going to use and it's taking up
space. If anyone has a use for it and will send me $8.95 for postage on
a Priority Mail flat rate box you are welcome to it.  Email me directly
at bob (at) bob-white (dot) com if you are interested,

Thanks,
Bob W.

-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/