|
Ok, the engine IS running and seems to be running
better each time. I want to do the autotune process, however, even tough
the engine is running, the EM2 is flashing between NOP and the engine RPM.
It flashes between the two while the engine runs. What is this telling
me? What does NOP stand for anyway. I must keep reading over it in
the manuals. Also, when I start the autotune process, NOP is displayed on
the program screen.
Also, I have misplaced my books from Tracy (the
Rotary Coversion Guide & the Mazda Papers). Could y'all point me to a
link and/or provide some basic engine parameter guidlines such as what is the
desired oil temp and water temp, preferred idle speed etc? My oil temp
seems to be holding around 190 F and my water was going up past 210. I
added an electric fan over the heat exchanger/radiator which help it get there
slower. Now, to be fair to my system, this was on a very hot ramp, in a
100 degree Houston summer in bright sun. A bit later it clouded up and the
temp went up much slower and was holding at about 190 to 200 ish before I shut
down to do other stuff.....well, actually, go home and eat the steak Jana made
for me <g>.
Thanks for the time and consideration. Y'all
are making this process MUCH more doable.
All the best,
Chris
|