|
Al,
I can't remember the rate but it would be something
like 100:1 to the fuel, even less if memory serves me correctly, maybe
150:1.
However the mechanical OMP has two settings one low
at low rpm and them full on at about 2,000 rpm.
I doubt if the OMP speed to the crank speed would
be of much use- Richard Sohn knows the in's and out's of this ( excuse the
pun).
George ( down under)
----- Original Message -----
Sent: Friday, July 06, 2007 10:12
AM
Subject: [FlyRotary] OMP flow rate
Does anyone know what the flow
rate is from the OMP?
Unfortunately, I don’t know what
year the pump is from. It is on my 20B which has a 12A front cover.
It is a 4-port, likely from a 13B, in which one port has been blocked
and the other three go one to each rotor housing.
The only data I have on hand is
what Richard measured some years ago, running the pump at 6000 rpm. This
could useful if I knew the ratio of pump speed to eccentric shaft
speed.
Thanks,
Al
|