Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.64; envelope-from=atlasyts@bellsouth.net
Mime-Version: 1.0 (Apple Message framework v752.2)
In-Reply-To: <list-2090495@logan.com>
References: <list-2090495@logan.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Message-Id: <1F49B31F-4481-40CD-AE0B-812C24C9111B@bellsouth.net>
Content-Transfer-Encoding: 7bit
From: Bulent Aliev <atlasyts@bellsouth.net>
Subject: Re: [FlyRotary] Re: FW: Side housings
Date: Fri, 8 Jun 2007 06:55:17 -0400
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>

That's right Kelly. His last engine, he's been racing it for 3 years  
and that's 9-11000 RPM.
He does not do anything else after lapping.
Buly

On Jun 7, 2007, at 10:56 PM, Kelly Troyer wrote:

>
>
>
> Buly,
>   I assume that your racing friend is happy with the lapping  
> pattern that
> he ends up with and does nothing else to the housing surface ??
>
> Kelly Troyer
>
>
> -------------- Forwarded Message: --------------
> From: Bulent Aliev <atlasyts@bellsouth.net>
> To: Kelly Troyer <keltro@att.net>
> Subject: Side housings
> Date: Thu, 7 Jun 2007 22:38:41 +0000
>
>
> Kelly,
> My hangar mate who races rotaries, does it a different way. He lays
> one housing down, smears some valve grinding compound,
> lays the other housing on top, and starts sliding it around. Soon
> you'll start seeing the high and low spots on both housings. Grind
> until satisfied :)
> Buly
>
> Bulent "Buly" Aliev
> FXE Ft lauderdale, FL
> http://tinyurl.com/dcy36
>
>
> BTW, my emails are bounced by the list? Please post it on the list
> for me Kelly
>