|
|
Sorry I'm slow in responding Ed. Us retired guyes are too busy. I have a Catto 76X88 and static has been 5500 rpm. I did fly the plane for over 1 hour Monday and noted the following info. At 3500 feet ASL , 75 deg F. OAT - 21.3 in MP, 5330 rpm , 205 deg F oil, 62 psi oil press., 188 deg F. water. I hope to get more time on the plane later this week. My exhaust is probably too restrictive. When flying alongside an RV 7A with a 180 Lyc. noone on the ground could hear my plane as we flew over at 2500 feet. The Lyc was much louder. I believe the Renesis is quiet by design!
Dennis H.
Ed Anderson wrote:
Hi Dennis,
I looked at your project information and see you have a 76x88 prop. I would be interested in what static rpm you are seeing. I was able to get 5800 static with the 76x88 and decided I wanted to get a bit more (6000), so had Clark take an inch off each blade leaving me with a 74x88. My static is now between 6000 and 6200 (cooler OAT) at static.
Ed
----- Original Message ----- From: "Dennis Haverlah" <clouduster@austin.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, May 17, 2007 12:25 PM
Subject: [FlyRotary] [Fwd: first flight Pictures]
I finally had time to get these pictures resized. First flight May
14,2007 I really appreciate the information on this site and will post
my experiences now that I am able to get some flight time!
Dennis Haverlah
-------------------------------------------------------------------------------- -- Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
-- Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|