Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.64; envelope-from=atlasyts@bellsouth.net
Mime-Version: 1.0 (Apple Message framework v752.2)
In-Reply-To: <list-2060198@logan.com>
References: <list-2060198@logan.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Message-Id: <1E9D2B74-DD39-4CCC-9738-51458010E75D@bellsouth.net>
Content-Transfer-Encoding: 7bit
From: Bulent Aliev <atlasyts@bellsouth.net>
Subject: Re: [FlyRotary] Re: Frustration
Date: Mon, 21 May 2007 22:38:18 -0400
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>


On May 21, 2007, at 9:50 PM, Russell Duffy wrote:
>
> That's almost certainly not keeping your engine from running, but  
> it IS suspicious.  Since you're desperate, have you tried removing  
> power to the EM-2 to see if the injectors will work?  It's a one in  
> a million thought, but they do talk, and the EM-2 can change the  
> lookup tables.  Would the injector simulate mode actuate the  
> injectors if all the fuel incjection tables were zero?  Maybe try  
> powering off the EM-2, and then resetting the EC-2 defaults to see  
> if anything changes (leaving the EM-2 off the whole time).
You are up-to something Rusty. When I checked my look up tables, they  
were flat. Do you think Tracy flat lined my EC2? :)
I tried also with EM2 turned off. Injectors did not react.
  I'll be busy the next few days, trying to make money to pay for my  
extravagant hobby. But later I'll try all of your suggestions, than  
will start shopping for a carburetor.
Buly