X-Virus-Scanned: clean according to Sophos on Logan.com X-SpamCatcher-Score: 30 [X] Return-Path: Received: from ms-smtp-05.southeast.rr.com ([24.25.9.104] verified) by logan.com (CommuniGate Pro SMTP 5.1.8) with ESMTP id 2055174 for flyrotary@lancaironline.net; Sun, 20 May 2007 11:58:56 -0400 Received-SPF: pass receiver=logan.com; client-ip=24.25.9.104; envelope-from=eanderson@carolina.rr.com Received: from edward2 (cpe-024-074-103-061.carolina.res.rr.com [24.74.103.61]) by ms-smtp-05.southeast.rr.com (8.13.6/8.13.6) with SMTP id l4KFwF7E008291 for ; Sun, 20 May 2007 11:58:16 -0400 (EDT) Message-ID: <009d01c79af7$edb10730$2402a8c0@edward2> From: "Ed Anderson" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: Frustration. The seriesl.... Date: Sun, 20 May 2007 12:00:03 -0400 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=response Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.3028 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.3028 X-Virus-Scanned: Symantec AntiVirus Scan Engine Hi Buly, been away at the mid-Atlantic Flyin for last two day. Sorry to see that your problem has not going away. I don't know if anyone has suggested this - but, if you can find a friend with an oscilloscope, it would be very quick and simple to see if the EC2 is putting out the triggering pulse. If the pulse train is OK at the EC2 end then the shield wire may be smoothing the pulse to the point that the power is distributed over time - diluting its peak value sufficiently that is unable open the injector. That and as has already been suggested - make certain the EC2 is really grounded to the rest of your electrical system ground. There should be no voltage dropped between our EC2 box and the ground (negative) terminal of the batter. If you take a voltohm meter and set it to a low voltage scale 0-2 volts for example. The needle should remain at zero (or you might have a few 10s of millivolts - but nothing approach a volt. If you do find voltage doing that test, that means you do not have an adequate ground between the EC2 and the rest of your electrical system. Good luck and get back flying! Ed ----- Original Message ----- From: "Bulent Aliev" To: "Rotary motors in aircraft" Sent: Sunday, May 20, 2007 6:26 AM Subject: [FlyRotary] Re: Frustration. The seriesl.... > > On May 20, 2007, at 12:16 AM, Ernest Christley wrote: > > >> Just a shot in the dark, but you said you've buzzed the wires to verify >> they're all connected. Have you buzzed them to verify that none are >> grounded to a neighbor? I like to put my meter on the diode test so >> that it beeps whenever it shorts. Then I pick up each pin individually >> and slide the other probe across all the other pins to verify that I >> haven't bridged something somewhere. >> > > I'll try this one too. Thanks Ernest > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: > http://mail.lancaironline.net:81/lists/flyrotary/List.html