X-Virus-Scanned: clean according to Sophos on Logan.com X-SpamCatcher-Score: 30 [X] Return-Path: Received: from imf16aec.mail.bellsouth.net ([205.152.59.64] verified) by logan.com (CommuniGate Pro SMTP 5.1.8) with ESMTP id 2054370 for flyrotary@lancaironline.net; Sat, 19 May 2007 23:09:19 -0400 Received-SPF: pass receiver=logan.com; client-ip=205.152.59.64; envelope-from=atlasyts@bellsouth.net Received: from ibm56aec.bellsouth.net ([65.8.11.104]) by imf16aec.mail.bellsouth.net with ESMTP id <20070520030843.IUBW19741.imf16aec.mail.bellsouth.net@ibm56aec.bellsouth.net> for ; Sat, 19 May 2007 23:08:43 -0400 Received: from [192.168.0.50] (really [65.8.11.104]) by ibm56aec.bellsouth.net with ESMTP id <20070520030842.LUAU17112.ibm56aec.bellsouth.net@[192.168.0.50]> for ; Sat, 19 May 2007 23:08:42 -0400 Mime-Version: 1.0 (Apple Message framework v752.2) In-Reply-To: References: Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: Bulent Aliev Subject: Re: [FlyRotary] Re: Frustration. The seriesl.... Date: Sat, 19 May 2007 23:09:22 -0400 To: "Rotary motors in aircraft" X-Mailer: Apple Mail (2.752.2) Bill, that was the next thing on the list. Thanks Buly On May 19, 2007, at 9:46 PM, Bill Schertz wrote: > Taking the approach of "what was changed" , you changed EC-2's > (Tracy modified, and Bob White's unmodified) and you changed the > wire going to the injector. > > Try going back to plain wire to the injectors to eliminate the > possibility of the wire having a problem. ??? > > Bill Schertz > KIS Cruiser # 4045 > ----- Original Message ----- From: "Bulent Aliev" > > To: "Rotary motors in aircraft" > Sent: Saturday, May 19, 2007 6:47 PM > Subject: [FlyRotary] Re: Frustration. The seriesl.... > > >> Al, >> I have two EC2's. Bob White sent me his to test against mine. The >> NOP is flashing on both and A/B processors too. >> I have power to pins 33 and 34. >> Spark plug / ignition test on Mode 8 works fine. >> 2 Serial leads have connectivity between EC and EM. >> Since I have a second EC to swap, the EC is not a suspect. >> During the Tracy's update I replaced the single wires to the >> injectors with two pairs of shielded 18 gauge I got at S&F. >> I started suspecting the wire, since it has one blue and one >> white wire inside. The number on the wire is: 2112/202SJ-18 1F2Y2. >> I thought it may be a some kind of resistor wire? But we tested >> resistance, and checked fine? >> Thanks Al. Looks like I need dumb luck to get out of this one :) >> Buly >> >> On May 19, 2007, at 8:29 PM, Al Gietzen wrote: >> >>> Buly; >>> >>> Two things: Have you checked that the processor chip(s) are >>> fully seated in >>> plug (base); and - is the behavior the same for both controllers? >>> >>> If you have +12 power to pins 33 or 34, and you have the serial lead >>> connected to the EM2, and the processor in functioning, you >>> should not see >>> NOP. Possibly something has happened in shipping or handling. >>> If the >>> processor is not functioning of course you can not trigger the >>> injectors. >>> >>> Good luck, >>> >>> Al >>> >>> >>> -- >>> Homepage: http://www.flyrotary.com/ >>> Archive and UnSub: http://mail.lancaironline.net:81/lists/ >>> flyrotary/List.html >> >> >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: http://mail.lancaironline.net:81/lists/ >> flyrotary/List.html > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net:81/lists/ > flyrotary/List.html