|
|
My coils are the LS-1 Bob, but the coils tested fine. Just the injectors are dead when the whole thing is plugged?
Buly
On May 17, 2007, at 11:45 PM, Bob White wrote:
Hi Buly,
I'm really disappointed. I was hoping it would fire right up. BTY,
do you have LS-1 coils. That's what my unit is programmed for.
Bob W.
On Thu, 17 May 2007 21:41:49 -0400
Bulent Aliev <atlasyts@bellsouth.net> wrote:
Today I received Bob White's EC and that helped clear Tracy's update
from being the problem. Did ring all the pins between the EC plug and
control panel. Everything checked OK. Did ring all the pins to the
crank angle sensor. All OK. Checked all ground pins for a 10th time,
all OK. Headed home in disgust. I'll keep pocking until I stumble on
something?
Buly
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
-- N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|