Received-SPF: none
 receiver=logan.com; client-ip=216.148.227.153; envelope-from=rlwhite@comcast.net
Date: Thu, 17 May 2007 18:47:24 -0600
From: Bob White <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Cc: "George Lendich" <lendich@optusnet.com.au>
Subject: Re: [FlyRotary] Re: BD-4 Status
Message-Id: <20070517184724.d3447fcb.rlwhite@comcast.net>
In-Reply-To: <list-2050338@logan.com>
References: <list-2050338@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Photography!  I'm going to dust off my 4X5.

Bob W.


On Fri, 18 May 2007 07:35:59 +1000
"George Lendich" <lendich@optusnet.com.au> wrote:

> Bob,
> My words were only encouragement to keep you involved in one way or 
> another - yep 5 or 10 years do go quickly, especially when your getting 
> older, but what else would we be doing!?
> George (down under)
> 
> > Hi George,
> >
> > Yes I could afford the kit, but not the 4 or 5 years putting it
> > together. :)  The way I work it could have stretched to 10. (I'm no
> > Rusty.)  The Vision _is_ a slick looking plane, and looks like it
> > could be a real performer.
> >
> > Bob W.
> >
> > On Thu, 17 May 2007 15:32:16 +1000
> > "George Lendich" <lendich@optusnet.com.au> wrote:
> >
> >> Bob,
> >> That is a good price - I must confess of likeing the BD4 myself.
> >> However if you only want to spend a few bob here and there ( excuse the 
> >> pun)
> >> the Vision is the way to go, for me anyway.
> >> Surely you could afford the THAT kit on offer. We don't get to see those
> >> sorts of deals in Australia.
> >> George ( down under)
> >>
> >> > Hi George,
> >> >
> >> > The BD-4 is kind of like that too.  There are a few custom items that
> >> > are hard to get, the main one being the wing spars.  Jim Bede and Team
> >> > Aviation are two current sources and there are a lot of old BD-4 kits
> >> > around that were never finished.  I looked at a kit that had very
> >> > little work done on it.  The whole kit was $5600 with a lot of
> >> > expensive options.  If you want high performance at a bargain price,
> >> > you can't beat the BD-4.
> >> >
> >> > One of my main goals was to have a fast cross country plane.  Most of
> >> > the big airshows where you can show off a rotary engine are quite a
> >> > ways from here. :)
> >> >
> >> > Bob W.
> >> >
> >> > On Thu, 17 May 2007 11:40:06 +1000
> >> > "George Lendich" <lendich@optusnet.com.au> wrote:
> >> >
> >> >>  Bob,
> >> >> There is a plane that you can build that will cost you 9/10's of sweet
> >> >> bugger all - however it plans built.
> >> >> The beauty of this plane (Vision) is that you can make parts as you 
> >> >> can
> >> >> afford them.
> >> >> I guess you already have instruments, engine etc.
> >> >> Worth some consideration.
> >> >> I'm working on a single rotary for the Light Sport Category (Vision).
> >> >> Power requirements are between 115 and 125hp.
> >> >> George ( down under)
> >> >>
> >> >
> >> > -- 
> >> > N93BD - Rotary Powered BD-4 - http://www.bob-white.com
> >> > 3.8 Hours Total Time and holding
> >> > Cables for your rotary installation - http://www.roblinphoto.com/shop/
> >> >
> >> > --
> >> > Homepage:  http://www.flyrotary.com/
> >> > Archive and UnSub:
> >> > http://mail.lancaironline.net:81/lists/flyrotary/List.html
> >>
> >>
> >> --
> >> Homepage:  http://www.flyrotary.com/
> >> Archive and UnSub: 
> >> http://mail.lancaironline.net:81/lists/flyrotary/List.html
> >
> >
> > -- 
> > N93BD - Rotary Powered BD-4 - http://www.bob-white.com
> > 3.8 Hours Total Time and holding
> > Cables for your rotary installation - http://www.roblinphoto.com/shop/
> >
> > --
> > Homepage:  http://www.flyrotary.com/
> > Archive and UnSub: 
> > http://mail.lancaironline.net:81/lists/flyrotary/List.html 
> 
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/