X-Virus-Scanned: clean according to Sophos on Logan.com X-SpamCatcher-Score: 2 [X] Return-Path: Received: from imf23aec.mail.bellsouth.net ([205.152.59.71] verified) by logan.com (CommuniGate Pro SMTP 5.1.8) with ESMTP id 2044344 for flyrotary@lancaironline.net; Mon, 14 May 2007 17:12:45 -0400 Received-SPF: none receiver=logan.com; client-ip=205.152.59.71; envelope-from=rusty@radrotary.com Received: from ibm66aec.bellsouth.net ([65.6.194.9]) by imf23aec.mail.bellsouth.net with ESMTP id <20070514211208.CSPN20461.imf23aec.mail.bellsouth.net@ibm66aec.bellsouth.net> for ; Mon, 14 May 2007 17:12:08 -0400 Received: from rd ([65.6.194.9]) by ibm66aec.bellsouth.net with ESMTP id <20070514211207.UBFA11697.ibm66aec.bellsouth.net@rd> for ; Mon, 14 May 2007 17:12:07 -0400 From: "Russell Duffy" To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Re: Frustrating Sunday Date: Mon, 14 May 2007 16:12:08 -0500 Message-ID: <020101c7966c$87f2f730$6e01a8c0@rd> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0202_01C79642.9F1CEF30" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.6822 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.3028 Importance: Normal Thread-Index: AceWalwlcisPLHsrRhC2Oa/NzlPr0AAAZbnQ In-Reply-To: This is a multi-part message in MIME format. ------=_NextPart_000_0202_01C79642.9F1CEF30 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit A tip for soldering 'D' connectors: I always plug the connector into a mating connector before soldering. If the plastic gets soft, the mating connector holds the pin in alignment until it cools off again. Bob W. This is a great tip, but everyone should note that he said "a mating connector", not "the mating connector". In other words, don't plug it into your EC-2 or EM-2 while your soldering. Note- this has been a public service announcement on behalf of Tracy Crook, and I'm sure he will approve this message :-) Cheers, Rusty ------=_NextPart_000_0202_01C79642.9F1CEF30 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Message

A tip for soldering 'D' connectors:  I always = plug the=20 connector into a mating connector before soldering.  If the plastic = gets=20 soft, the mating connector holds the pin in alignment until it cools off = again.

Bob W.

 
This is = a great tip, but=20 everyone should note that he said "a mating connector", not "the mating=20 connector".  In other words, don't plug it into your EC-2 or EM-2 = while=20 your soldering. 
 
Note- = this has been a=20 public service announcement on behalf of Tracy Crook, and I'm sure = he will=20 approve this message :-)
 
Cheers,
Rusty



 ------=_NextPart_000_0202_01C79642.9F1CEF30--