Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.70; envelope-from=atlasyts@bellsouth.net
From: <atlasyts@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Frustrating Sunday
Date: Mon, 14 May 2007 10:05:45 -0500
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Message-Id: <20070514150546.EWAW11495.ibm67aec.bellsouth.net@mail.bellsouth.net>

 
> But, it would appear in your case, that either the EC2 is not grounding your 
> injectors OR there is a connection problem between your EC2 and injectors. 
> Since you can't dig into the EC2, I would make certain there is a connection 
> between the EC2 and injectors.  You said you grounded the injectors and they 
> clicked, did you ground them at the EC2 terminal - if you did then that 
> would indicate the wiring connection is OK.  But, if you just grounded them 
> close to the injectors, then that does not prove anything about your 
> connectivity to the EC2 - only that you have power to the injectors.
> 
> I will be going out tomorrow to dig into my problem and will let you know 
> what I find.
> 
> Ed

Ed, I pulled the D connector from the EC2 and grounded the pins at the EC connector. Each injector clicked. ???
Buly