Received-SPF: none
 receiver=logan.com; client-ip=207.69.195.65; envelope-from=mldsub@earthlink.net
From: "Sandy" <mldsub@earthlink.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: Cooked Board - Really!
Date: Sat, 24 Feb 2007 03:07:18 -0500
Message-ID: <02b201c757ea$cded1920$6401a8c0@pss6ea5f1dbeb5>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
In-Reply-To: <list-1859026@logan.com>
Importance: Normal

They also make cookie sheets and baking pans out of it.
You might be able to get it at Wal-Mart for a couple of bucks
if you need more.
--Sandy

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Ed Anderson
Sent: Friday, February 23, 2007 8:14 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Cooked Board - Really!

Good suggestion, I happen to have some.

Thanks Sandy

Ed

----- Original Message -----=20
From: "Sandy" <mldsub@earthlink.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, February 23, 2007 7:55 PM
Subject: [FlyRotary] Re: Cooked Board - Really!


Maybe McMaster-Carr part #8525T41.
--Sandy

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Ed Anderson
Sent: Friday, February 23, 2007 4:10 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Cooked Board - Really!

Neat Idea, Ernest

Might be less work than trying to develop a manual "pick and Place" =
gantry
{:>).  I wonder what is easy enough to cut but will withstand 468F for =
90
seconds?

Ed
----- Original Message -----=20
From: "Ernest Christley" <echristley@nc.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, February 23, 2007 3:11 PM
Subject: [FlyRotary] Re: Cooked Board - Really!


> Ed Anderson wrote:
>
>> My highly advanced GE convection reflow oven cost $38.99 and that =
part of

>> the experiment work perfectly.  Besides, I don't have room for one =
that
>> size, Mike {:>)
>>  The most difficult part of the experiment was placing the components
>> without rubbing the solder paste off the pad and knocking another
>> component askew. I now understand why they talked about "arm rests".  =
It
>> doesn't take much to get misalign.
>>
>
>
> Ed, get a second piece of plexiglass cut.  This one to have large =
holes to

> clear the solder pads, but comes in to the thickness of the =
components.
> The idea is to drop the components into a hole that will force them =
into
> alignment.  All the better if it's made of a material that can stand =
the
> heat of the oven.
>
> --=20
>         ,|"|"|,              Ernest Christley       |
> ----=3D=3D=3D<{{(oQo)}}>=3D=3D=3D----    Dyke Delta Builder      |
>        o|  d  |o        http://ernest.isa-geek.org  |