|
|
Al,
Actually that is an older picture. I was concerned about the solid tube cracking under vibration, etc. I replaced the tube with #4AN SS telfon tubing.
Steve Brooks
On 12/14/06, Bulent Aliev <atlasyts@bellsouth.net> wrote:
On Dec 13, 2006, at 10:50 PM, Al Gietzen wrote:
>
> Flight
>
>
> Steve,
>
> I noticed in your attached picture a solid aluminum tube feeding
> the redrive. Please check this often, and consider supporting the
> tube in mid span to avoid the possibility of fatigue cracking from
> (the 'non-existant') vibration.
>
>
> I have basically the same setup. I put a 'snubber' at the re-drive
> plate.
>
>
> Al
>
>
I also use the aluminum tube. Made a wide S to allow for expansion
and have it clamped mid way with adel clamp to the bellhousing.
Buly
>
--
Homepage:
http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|