|
|
On Dec 13, 2006, at 10:50 PM, Al Gietzen wrote:
Flight
Steve,
I noticed in your attached picture a solid aluminum tube feeding the redrive. Please check this often, and consider supporting the tube in mid span to avoid the possibility of fatigue cracking from (the 'non-existant') vibration.
I have basically the same setup. I put a ‘snubber’ at the re-drive plate.
Al
I also use the aluminum tube. Made a wide S to allow for expansion and have it clamped mid way with adel clamp to the bellhousing.
Buly
|
|