|
|
Hi Thomas,
See reply to Bob. The pushers are definitely more work with those long
cable runs. My work area isn't long enough.
Bob W.
On Mon, 30 Oct 2006 15:52:24 -0800
"Thomas Phy" <thomphy@msn.com> wrote:
Me to. The RV-? crowd should be a no brainier.
TP
RV-7
----- Original Message ----- From: "Bob Tilley" <btilley@mchsi.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, October 30, 2006 3:11 PM
Subject: [FlyRotary] Re: Prewired EC2 Cables
> Bob,
> > I would like to get a wiring harness! Tracy's EC2, LS1 coils, long > wiring length. What other info do you need? I'm installing it in a > Cozy MK IV.
> > Bob Tilley
> 802 Beechwood Dr
> Albany, Ga 31721
> > > On May 26, 2005, at 12:27 AM, Bob White wrote:
> > > I'm contemplating offering prewired cables for Tracy's EC2. I've been
> > in the electronics field for over 40 years so soldering and cabling > > are
> > easy for me.
> >
> > I would prewire the 15 and 37 pin connectors to your specified length.
> > Other wires would be long enough to be cut off and terminated by you.
> > Wires would be tefzel (M22759/16) or better and each wire would be
> > clearly marked. Everything would be done to the specs in Tracy's
> > manual.
> >
> > Using my installation as a reference, I would make the unterminated
> > wires that go under the insturment panel 5 feet long and those > > going to
> > the engine compartment 10 feet long. Length from the 15 pin
> > connector to the 37 pin connector is 36 inches. Based on that, the > > cost
> > would be $95 but this would be adjusted for different lenght
> > requirements. These lengths should leave enough wire for most
> > installations.
> >
> > Also, for the canard community, I would be willing to cable > > anything up
> > to your specifications, but because of the long runs and > > sensitivity to
> > noise I wouldn't want to gurantee sucess in using the cable.
> >
> > Is there any interest in such a service?
> >
> > Bob White
> >
> > -- > > http://www.bob-white.com
> > N93BD - Rotary Powered BD-4 (real soon)
> >
> >>> Homepage: http://www.flyrotary.com/
> >>> Archive: http://lancaironline.net/lists/flyrotary/List.html
> >
> > > --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
> --
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
First engine start 1/7/06 - Special Airworthiness Certificate 10/1/06
Cables for your rotary installation - http://www.roblinphoto.com/shop/
|
|