|
|
Thomas, You may want to take the easy route and go by a tire shop that
specializes in truck tires. They should have a socket that will fit and
will zing it off with their 1" impact wrench for a few bucks. Why
wrestle the 100 pound gorilla if you don't have to? Mark S.
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of David Staten
Sent: Monday, October 23, 2006 6:20 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Flywheel nut
Thats all nice and dandy.. but I seriously doubt these guys make a 54 mm
socket..
For the original poster, I bought mine from a tool truck as he was making the rounds to the garages where he sold to mechanics. Not cheap, and its not used a lot.. but it gets the job done. You may find what you
are looking for in a surplus yard too, or even in a comprehensive auto parts store.
Dave
Donald Willard Garrett wrote:
Years ago, I stayed up watching one of those infomercial shows, and made what turned out to be my favorite tool purchase ever. When they got stolen from my car, I bought the deluxe set, and like it even better. Rather than turning the corners of the nut, they cam onto the face, meaning:
1. each socket / wrench does both metric and the nearest fraction of
an inch
2. you can't strip a nut or bolt head with them
3. you can turn a nut or bolt that's stripped almost round
Additionally, I've used (abused) them with cheater bars, and am confident that anything I can get a socket on I can either crack or twist off the bolt (like the head bolt on a Chevy 454--oops). I've pulled engines etc. foreign and domestic, and handed them over on numerous occasions to jobsite crews when regular hex wrenches fail (tool sacrifice--watched guys hang from them and hit them with hammers) with zero failures.
There you have it, of all the tools I own, the only ones I'd ever do a
commercial for!
http://www.mitools.com/
Donald Garrett flyrotarynospam@avamail.net
On 06.10.23 07:44:17, Thomas Phy (thomphy@msn.com) wrote:
> Hi all,
> Does anyone know the size socket needed to remove the flywheel nut
on a
> Renesis? 2 1/8 " measures tight. And where has anyone bought said socket?
> Thomas Phy
> Renesis finally in shop!
-- Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|