|
|
Yep, Burns does NOT carry 321 in anything other than "U-Bends". If you need
a 90deg bend with 6"-8" legs - forget it. I called them and asked if I could
get them made - "NO".
Woolfe Aircraft is the place to go - or have someone like "Aircraft Exhaust"
in Princeton, MN build it for you.
Joe Hull
Cozy Mk-IV N31CZ (65 hrs - Rotary 13B NA) Redmond (Seattle), Washington
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Hutchison, Jason
Sent: Monday, August 14, 2006 6:02 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Stainless 321 Tubing
Joe,
Have you tried BURNS STAINLESS? www.burnsstainless.com
Jason
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Joe Hull
Sent: Wednesday, August 02, 2006 10:58 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Stainless 321 Tubing
I'm having a heck of a time finding 321 Stainless mandrel bends in
anything
larger than .049 wall. I'm trying to get 4 - 4" Center Line Radius, 90deg
bends in at least .065" wall. I've tried calling 4 places and researching
a
hundred others online and my last hope appears to be Woolf Aircraft
Products
(http://www.woolfaircraft.com/).
Is .049" wall beefy enough? If I recall, it seems that most people are
using
material that is larger. RacingBeat/MazdaTrix sell .125" wall but only in
"mild steel" not stainless.
Anyone else have any suggestions?
Joe Hull
Cozy Mk-IV N31CZ (65 hrs - Rotary 13B NA)
Redmond (Seattle), Washington
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|