|
|
Buly/ Bill,
I'm confused - any indications, suggestions, ideas why there should be a
difference.
Perhaps higher pressure after the pump?
I think I would want to know the highest, in engine, coolant and oil temps.
George (down under)
I did it with one of the handheld temp meters. Surprisingly the water
exiting the pump was about 5-10 degree lower temp? Did it couple
different ways and the results were similar.
Buly
> Group,
>
>
>
> Has anyone measured the water temp difference between the stock
> (under the oil filter tower) and the water pump outlet. Bill Eslick
> and I were discussing this a couple of weeks ago. I am measuring
> water temp going out of the engine, post water pump outlet. Just
> curious!
>
>
>
> Thanks,
>
> Jason
>
>
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|