|
Lynn, great sketch. The tabs are 3/4" for standoff distance, then
shorter bend for 1/4" wide clamp, then tiny bend to hold clamp from slipping
sideways.
As always, many thanks.
David
----- Original Message -----
Sent: Tuesday, July 25, 2006 7:43
PM
Subject: [FlyRotary] Re: More cooling
Tests
Lynn, I understand the concept of radiant heat shields and like the
idea of fabricating custom shields to put where I need them.
. . . I can't visualize the "3 z shaped tabs" and how to attach
them to an exhaust pipe with 1/4" hose clamps and have 3/4 inch air gap
between pipe and shield.
David
This is in MSPaint so it is not as good as it should be.
I would drill and wire the clamp screw as well as a loop beside the
clamp, just in case the clamp goes away.
Lynn E. Hanover
--
Homepage: http://www.flyrotary.com/
Archive and
UnSub:
http://mail.lancaironline.net/lists/flyrotary/
|