|
|
Hi Steve,
Yes, I used Bruce's video as well - help me a great deal. DVD format may appeal to some folks. I know I spent hours sitting in bed with laptop on my lap typing a check list as I reviewed Bruce's Video.
Here's a photo of the progress on the hangar door structure to date. Only working in the mornings as it just gets too hot around 1:00 PM. The door (looks like shed roof) will have sheeting applied then stood on its side to attach to the header beam. Only weighs approx 300 lbs at this point. The beam ended up weighing approx 185 lbs.
I can't fly until I get the door done, so some incentive there - but too hot to really enjoy flying in any case.
Ed
----- Original Message ----- From: "Steve Brooks" <prvt_pilot@yahoo.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, July 20, 2006 4:59 PM
Subject: [FlyRotary] Re: 13B and 20B Overhaul DVDs
Ed,
I used Bruce's video (VCR) when I rebuilt my engine.
In fact, I had a TV/VCR in the shop, and watched each
section while I did the work on the engine.
My engine runs great, so I guess that its a great
video.
Steve Brooks
--- Ed Anderson <eanderson@carolina.rr.com> wrote:
For some of you who wish a better understanding of
how to overhaul your rotary, there are Bruce
Turrentines' videos and I have just ran across this
series - looks like they could be useful. I've not
seen one so can't recommend one way or the other.
If anyone has purchased this set and would wish to
comment, I'm sure we would all appreciate your
comments.
http://www.diy-re.co.nz/
Ed Anderson
Rv-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com
http://members.cox.net/rogersda/rotary/configs.htm#N494BW
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|