X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from [216.211.128.10] (HELO mail-in04.adhost.com) by logan.com (CommuniGate Pro SMTP 5.1c.2) with ESMTP id 1239502 for flyrotary@lancaironline.net; Mon, 17 Jul 2006 01:22:23 -0400 Received-SPF: none receiver=logan.com; client-ip=216.211.128.10; envelope-from=joeh@pilgrimtech.com Received: from Pilgrim10 (c-67-183-14-47.hsd1.wa.comcast.net [67.183.14.47]) by mail-in04.adhost.com (Postfix) with ESMTP id 23DF5BFEC5 for ; Sun, 16 Jul 2006 22:21:12 -0700 (PDT) (envelope-from joeh@pilgrimtech.com) From: "Joe Hull" To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Re: damage report Date: Sun, 16 Jul 2006 22:21:11 -0700 Message-ID: <00ce01c6a960$d3f59740$bb02a8c0@redmond.corp.microsoft.com> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_00CF_01C6A926.2796BF40" X-Mailer: Microsoft Office Outlook 11 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Thread-Index: AcapTGfB+AfIpGR0SxqoCln6KXP+awAFDJVA In-Reply-To: This is a multi-part message in MIME format. ------=_NextPart_000_00CF_01C6A926.2796BF40 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Bill - My oil pressure still may be a bit on thelow side but - At 5300 RPM 180F - 50 PSI 195F - 47PSI Joe Hull Cozy Mk-IV (45 hrs - Rotary 13B NA) Redmond (Seattle), Washington _____ From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bill Eslick Sent: Sunday, July 16, 2006 7:54 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: damage report Tracy, I reset the EC2 to the "RV-Otter" settings (cold start on), and it is very close now. Got rid of most of the staging stutter too! Now a question about oil pressure for the group. Since I removed the balls and springs from the rotor jets and have stock jets, here are my oil pressure readings. Somebody let me know if this looks like enough flow. Cruising at 5350 RPM, Oil Temp Oil Pressure 160 86 195 75 201 70 and at idle RPM with Oil Temp at 170, RPM Oil Pressure 1250 19 2000 37 -- Bill Eslick www.weslick.com/RV6Index.htm On 7/13/06, Tracy Crook wrote: Latest software for the EC2 addresses this problem. If you haven't upgraded since around Mar 2005, this is highly recommended. In the mean time, I suggest 16 - 17" Hg for staging point. Yes, changing staging point means you have to re-do the map table in this area. In the mean time, If you are having this surge and have an EM2, step to the map entry just above the staging point and richen it and the next two about 30 - 40. This problem is usually caused by the engine going lean right after the staging point. You can do it without an EM2 but it requires a bit of finesse. Turning up the mixture control will also eliminate the surge but the engine will probably be running rich under the staging point. Tracy (really not wanting to drum-up update business) ----- Original Message ----- From: James Maher To: Rotary motors in aircraft Sent: Thursday, July 13, 2006 4:45 PM Subject: [FlyRotary] Re: damage report Bill, If/when you find a solution to the annoying surge during high idle/taxi let us all know what it is. I too am experiencing this annoyance. I think we need to set the staging point higher but have not tried this yet. Jim Bill Eslick wrote: SNIP Now that the engine is running correctly again, I have to start all over again programming my EC2! That nasty crossover point at 15" MAP is giving me an annoying surge at a high idle (taxi) speed. Hope a close reading of my manual will let me sort that out. SNIP ------=_NextPart_000_00CF_01C6A926.2796BF40 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Bill – =

My oil pressure still may be a bit = on thelow side but –

At 5300 = RPM

180F – 50 = PSI

195F – = 47PSI

 

Joe = Hull

Cozy Mk-IV (45 hrs - Rotary 13B = NA)

Redmond (Seattle), Washington

 

From: = Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bill Eslick
Sent: Sunday, July 16, = 2006 7:54 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: = damage report

 

Tracy,

 

I reset the EC2 to the "RV-Otter" settings (cold start = on), and it is very close now.  Got rid of most of the staging stutter = too!

 

Now a question about oil pressure for the group.  Since I = removed the balls and springs from the rotor jets and have stock jets, here are = my oil pressure readings.  Somebody let me know if this looks like enough = flow.

 

Cruising at 5350 RPM,

 

Oil Temp     Oil = Pressure

160          &n= bsp;     86

195          &n= bsp;     75

201          &n= bsp;     70

 

and at idle RPM with Oil Temp at = 170,

 

RPM         Oil = Pressure

1250          &= nbsp;   19

2000          &= nbsp;   37

 

--
Bill Eslick  
www.weslick.com/RV6Index.htm=

 

On 7/13/06, Tracy Crook <lors01@msn.com> wrote:

Latest = software for the EC2 addresses this problem.   If you haven't upgraded = since around Mar 2005, this is highly = recommended. 

 

In the mean = time, I suggest 16 - 17" Hg for staging point.  Yes, = changing staging point means you have to re-do the map table in this area.   In = the mean time, If you are having this surge and have an EM2,  step = to the map entry just above the staging point and richen it and the next two about 30 - 40. 

 

This problem = is usually caused by the engine going lean right after the staging point.   You can do it without an EM2 but it requires a bit of finesse.   Turning up the mixture control will also eliminate = the surge but the engine will probably be running rich under the staging = point.

 

Tracy  (really not wanting to drum-up update = business)

----- Original Message ----- =

From: James Maher

Sent: Thursday, July 13, 2006 4:45 = PM

Subject: [FlyRotary] Re: damage report


 

Bill,

If/when you = find a solution to the annoying surge during high = idle/taxi

let us all = know what it is.

I too am = experiencing this annoyance.

I think we = need to set the staging point higher but have not tried this = yet.

 

Jim

Bill Eslick = <wgeslick@gmail.com > wrote:

SNIP

 

Now that the = engine is running correctly again, I have to start all over again programming my EC2!  That nasty crossover point at 15"  MAP is giving me = an annoying surge at a high idle (taxi) speed.  Hope a close reading = of my manual will let me sort that out. 

 

 

SNIP



------=_NextPart_000_00CF_01C6A926.2796BF40--