X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from mail12.syd.optusnet.com.au ([211.29.132.193] verified) by logan.com (CommuniGate Pro SMTP 5.1c.2) with ESMTPS id 1239135 for flyrotary@lancaironline.net; Sun, 16 Jul 2006 18:48:12 -0400 Received-SPF: none receiver=logan.com; client-ip=211.29.132.193; envelope-from=lendich@optusnet.com.au Received: from george (d58-104-190-41.dsl.nsw.optusnet.com.au [58.104.190.41]) by mail12.syd.optusnet.com.au (8.12.11/8.12.11) with SMTP id k6GMl8Hi008116 for ; Mon, 17 Jul 2006 08:47:15 +1000 Message-ID: <003501c6a929$ce4094d0$29be683a@george> From: "george lendich" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: Fw: Engine flanges. Date: Mon, 17 Jul 2006 08:47:17 +1000 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0032_01C6A97D.9BC20DF0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 This is a multi-part message in MIME format. ------=_NextPart_000_0032_01C6A97D.9BC20DF0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message Bill. I wasn't sure that you were talking about exhaust flanges - I have a = drawing on those that would have saved you some time. It took me ages to = get the exit hole accurate and mine aren't as big as yours, are you sure = you made them big enough- just ribbing ya!. I had mine water jet cut (cheapest quote) $15-00 each, however the = water jet does taper a little on thicker material and I made the hole = just a tad smaller and trimmed it in the lathe. I will send you the drawings if you need them! George ( down under) Here are two. Bill Schertz KIS Cruiser # 4045 ----- Original Message -----=20 From: george lendich=20 To: Rotary motors in aircraft=20 Sent: Sunday, July 16, 2006 1:27 AM Subject: [FlyRotary] Re: Fw: Engine flanges. Bill - what sort of flanges are those, any pictures? George ( down under) ----- Original Message -----=20 From: Bill Schertz=20 To: Rotary motors in aircraft=20 Sent: Sunday, July 16, 2006 12:33 PM Subject: [FlyRotary] Fw: Engine flanges. Brit Adams cuts very nice ones out of 321 SS (laser cut). Bill Schertz KIS Cruiser # 4045 ----- Original Message -----=20 From: Brit Adams=20 To: William=20 Sent: Wednesday, March 02, 2005 6:06 PM Subject: RE: Engine flanges. William, Well, it is nice to know I have Kevin fooled! We can cut you two flanges with the proposed change, no problem. = You are looking at $25 ea for them. Shipping would be additional. When = they are done, we can call you, get a credit card number and take care = of it all then. I will wait for a verification email to proceed with this = understanding: Cut two of the same flanges that Kevin designed (I already = verified that he is okay with that), except put a 1.75" diameter bore in = them. I will put the center of the bore in line with the bolt holes = left-to-right, and at that 2.4/2.6 coordinate up-to-down (.100" off of = centered between the bolt holes). If that is okay, we will get going, and should be able to have = them on UPS (or other) in a week or less. Let me know, and thanks for the inquiry. Brit Adams Laser Cutting Services -----Original Message----- From: William [mailto:wschertz@ispwest.com]=20 Sent: Wednesday, March 02, 2005 02:30 PM To: Brit Adams Subject: Engine flanges. Brit Adams You were recommended to me by Kevin Lane, (see note below) I am interested in having some flanges very similiar to what = Kevin had made, from 304 Stainless steel. The only change that I would want is to have the center hole be = circular (i.e. round) for 1.75" tube to be welded into place. The = picture sony 001.jpg is a photo of the flanges you made below, = Scan10023_c.jpg is a scan Kevin's drawing showing the desired change to = a round hole instead of the peculiarly shaped one. Are you willing to make more flanges? I am in need of two of = them. What would be your price and turnaround time? Thank you William Schertz 630-460-8423 Wschertz@ispwest.com Note from Kevin below. -------------------------------------------- Laser Cutting Services PO Box 1945 Lake Oswego OR 97035 (503) 612-8311 Brit programs the laser, takes care of orders, seems quite = competent, returns calls, double checks discrepancies etc.... Brit Adams E-mail Address(es): Brit@lasercuttingservices.com Kevin Lane Portland, OR e-mail-> n3773@comcast.net web-> http://home.comcast.net/~n3773 (browse w/ internet explorer) ----- Original Message -----=20 From: kevin lane=20 To: Rotary motors in aircraft=20 Sent: Tuesday, March 01, 2005 6:32 PM Subject: [FlyRotary] laser parts my flanges came back from Laser Cutting Services. They have = been great people to deal with. I left the slug in the one flange to = show how thin a cut the laser makes. Apparently water jet cutting = produces even a finer cut, but for small production runs laser is = cheaper. These are 3/8" 304 stainless.=20 -------------------------------------------------------------------------= ----- -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ ------=_NextPart_000_0032_01C6A97D.9BC20DF0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message
 
Bill.
I wasn't sure that you were = talking about=20 exhaust flanges - I have a drawing on those that would have saved you = some=20 time. It took me ages to get the exit hole accurate and mine aren't as = big as=20 yours, are you sure you made them big enough- just ribbing ya!.
I had mine water jet cut (cheapest = quote) $15-00=20 each, however the water jet does taper a little on thicker material = and I made=20 the hole just a tad smaller and trimmed it in the lathe.
I will send you the drawings if you = need=20 them!
George ( down under)

Here are two.
Bill Schertz
KIS Cruiser # 4045
----- Original Message -----
From:=20 george lendich
To: Rotary motors in = aircraft=20
Sent: Sunday, July 16, 2006 = 1:27=20 AM
Subject: [FlyRotary] Re: Fw: = Engine=20 flanges.

Bill - what sort of flanges are = those, any=20 pictures?
George ( down under)
----- Original Message ----- =
From:=20 Bill=20 Schertz
To: Rotary motors in = aircraft=20
Sent: Sunday, July 16, 2006 = 12:33=20 PM
Subject: [FlyRotary] Fw: = Engine=20 flanges.

Brit Adams cuts very nice ones = out of 321 SS=20 (laser cut).
Bill Schertz
KIS Cruiser # 4045
----- Original Message -----=20
From: = Brit Adams =
To: William
Sent: Wednesday, March 02, 2005 6:06 PM
Subject: RE: Engine flanges.

William,
 
Well, it is nice to know I have Kevin = fooled!
 
We can cut you two flanges with the proposed change, no = problem.=20 You are looking at $25 ea for them. Shipping would be additional. = When=20 they are done, we can call you, get a credit card number and take = care of=20 it all then.
 
I will wait for a verification email to proceed with this = understanding:
 
Cut two of the same flanges that Kevin designed (I = already verified=20 that he is okay with that), except put a 1.75" diameter bore in = them. I=20 will put the center of the bore in line with the bolt holes = left-to-right,=20 and at that 2.4/2.6 coordinate up-to-down (.100" off of centered = between=20 the bolt holes).
 
If that is okay, we will get going, and should be able to = have them=20 on UPS (or other) in a week or less.
 
Let me know, and thanks for the = inquiry.
 
Brit Adams
Laser Cutting Services
-----Original = Message-----
From: William=20 [mailto:wschertz@ispwest.com]
Sent: Wednesday, March = 02, 2005=20 02:30 PM
To: Brit Adams
Subject: Engine=20 flanges.

Brit Adams
You were recommended to me by = Kevin Lane,=20 (see note below)
 
I am interested in having some = flanges very=20 similiar to what Kevin had made, from 304 Stainless = steel.
 
The only change that I would = want is to=20 have the center hole be circular (i.e. round) for 1.75" tube to = be=20 welded into place. The picture sony 001.jpg is a photo of the = flanges=20 you made below, Scan10023_c.jpg is a scan Kevin's drawing = showing the=20 desired change to a round hole instead of the peculiarly shaped=20 one.
 
Are you willing to make more = flanges? I am=20 in need of two of them.  What would be your price and = turnaround=20 time?
 
Thank you
William Schertz
630-460-8423
Wschertz@ispwest.com
 
Note from Kevin = below.
--------------------------------------------
Laser Cutting Services
PO Box 1945
Lake Oswego OR 97035
(503) 612-8311
Brit programs the laser, takes care of orders, seems quite=20 competent, returns calls, double checks discrepancies = etc....
Brit Adams
E-mail Address(es):
  Brit@lasercuttingservices.c= om
 
 
Kevin Lane  Portland, OR
e-mail-> n3773@comcast.net
web-> http://home.comcast.net/~n3773
(browse=20 w/ internet explorer)
----- Original Message -----
From: = kevin lane
To: Rotary motors in=20 aircraft=20
Sent: Tuesday, March 01, = 2005 6:32=20 PM
Subject: [FlyRotary] laser=20 parts

my flanges came back from Laser Cutting Services.  = They=20 have been great people to deal with.  I left the slug = in the=20 one flange to show how thin a cut the laser makes.  = Apparently=20 water jet cutting produces even a finer cut, but for small=20 production runs laser is cheaper.  These are 3/8" 304=20 stainless.=20 =

--
Homepage:  http://www.flyrotary.com/
Archive and=20 UnSub:  =20 http://mail.lancaironline.net/lists/flyrotary/
------=_NextPart_000_0032_01C6A97D.9BC20DF0--