Received-SPF: pass
 receiver=logan.com; client-ip=24.25.9.102; envelope-from=eanderson@carolina.rr.com
Message-ID: <001801c69aa5$e38e6840$2402a8c0@edward2>
From: "Ed Anderson" <eanderson@carolina.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-1209334@logan.com>
Subject: Re: [FlyRotary] Re: Time marches on...parts get made
Date: Wed, 28 Jun 2006 07:27:49 -0400
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=response
Content-Transfer-Encoding: 7bit

Buly, I actually looked into that and found out the structural fiberglass 
material (which is available) cost $20 per square foot and I would need 
approx 360 sq ft.  So 20 * 360 = $7200 - I decided to forego making it out 
of fiberglass {:>)_

Ed
----- Original Message ----- 
From: "Bulent Aliev" <atlasyts@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Tuesday, June 27, 2006 10:16 PM
Subject: [FlyRotary] Re: Time marches on...parts get made


> >
>> Me - decided to ditch my door design when I found out the cost of 
>> shipping the metal material would cost as much as the material  itself. 
>> So am now doing it in wood that is available at the local  stores and it 
>> appears that may actually work out to be less work  {:>) not to mention 
>> costing less. Iteration 24 }:<(
>>
>> Ed
>
> Ed, you can always make them out of fiberglass :)
> Buly
>
>
>
>
>
>
>
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
>