Received-SPF: none
 receiver=logan.com; client-ip=204.127.200.82; envelope-from=wschertz@comcast.net
Message-ID: <009e01c69743$fd4728e0$c8c20718@7n7z201>
From: "Bill Schertz" <wschertz@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-1204067@logan.com>
Subject: Re: [FlyRotary] Re: Radio noise
Date: Fri, 23 Jun 2006 23:09:28 -0500
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit

Thanks Joe, if you have a chance I would like to hear the value of the 
suggested capacitor.
Bill Schertz
KIS Cruiser # 4045
----- Original Message ----- 
From: "Joe Hull" <joeh@pilgrimtech.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, June 23, 2006 6:23 PM
Subject: [FlyRotary] Re: Radio noise


> I have an SL-30 NAV/COM and SL-40 COM. The COM works, but when I turn on
> the
> EM-2 I get a bunch of hash (white noise).  Any suggestions on diagonstics?
> The EM-2 is not connected to 'all' sensors yet.
>
> Bill Schertz

I can't give you any suggestions that I have tried - but I have the same
issue - sort of and a "EE" friend suggested a fix. My problem is a little
different in that I don't get the white noise on my wired in COM radio -
only on my hand-held when the EM-2 is on. The suggested fix was to wire in a
ceramic capacitor between the power and ground leads as close to the
connector as possible. I think the value of the capacitor was 1MF - I'd have
to double check that.

Joe Hull
Cozy Mk-IV #991 (In Phase1 Flight Test - 35.6 hrs flown)
Redmond (Seattle), Washington


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/