Received-SPF: none
 receiver=logan.com; client-ip=216.148.227.151; envelope-from=wschertz@comcast.net
Message-ID: <001a01c6940b$5e9063f0$c8c20718@7n7z201>
From: "Bill Schertz" <wschertz@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-1183931@logan.com>
Subject: Re: [FlyRotary] Intake Runner Bell Mouths( was re: Fuel Injector O Rings )
Date: Mon, 19 Jun 2006 20:46:37 -0500
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit

Tracy made his from wood.
Bill Schertz
KIS Cruiser # 4045
----- Original Message ----- 
From: "Scott" <squiggles@yahoo.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, June 19, 2006 4:29 PM
Subject: [FlyRotary] Intake Runner Bell Mouths( was re: Fuel Injector O 
Rings )


> Hey Bill...
>
> Right you are...I hadn't had the chance to contact Ed
> Klepeis about making 4 custom bells for the
> openings...
>
> Though, are I am sure there must be places on the web
> which sell these already.  Tracy where did you source
> your these bells(
> http://www.rotaryaviation.com/images/Renesis/Shoebox_1_08_08_2004.JPG
> ) from?
>
> Thx...
> -Scott
>
>>Scott,
>>It looks like you have a sharp edge inside the
> manifold
>>log, where the intake tube intersects. That usually
> is a
>>'no-no' from a pressure drop standpoint, are you
>>planning on putting a rounded edge in that area?
>
>>Bill Schertz
>>KIS Cruiser # 4045
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/