|
|
TWM Induction sells a wide variety of intake runner bell mouths (air
horns). You can see them at this web page. http://www.twminduction.com/AirHorn/AirHorn-FR.html
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Scott
Sent: Monday, June 19, 2006 4:29 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Intake Runner Bell Mouths( was re: Fuel Injector O
Rings )
Hey Bill...
Right you are...I hadn't had the chance to contact Ed
Klepeis about making 4 custom bells for the
openings...
Though, are I am sure there must be places on the web
which sell these already. Tracy where did you source
your these bells(
http://www.rotaryaviation.com/images/Renesis/Shoebox_1_08_08_2004.JPG
) from?
Thx...
-Scott
Scott,
It looks like you have a sharp edge inside the
manifold log, where the intake tube intersects. That usually
is a 'no-no' from a pressure drop standpoint, are you planning on putting a rounded edge in that area?
Bill Schertz
KIS Cruiser # 4045
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com --
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|