Received-SPF: none
 receiver=logan.com; client-ip=68.142.206.241; envelope-from=prvt_pilot@yahoo.com
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=s1024; d=yahoo.com;
  h=Received:From:To:Subject:Date:User-Agent:References:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding:Content-Disposition:Message-Id;
  b=1ObUrat4HPQokpcBc5Kx7pcTU4pz17JFHcqCSWDpsIkYMKFaJUERW4UUu+lMFpUj8LpFWh8B5PGZnBN2ZKlPh/q8RBxaVTZm52IJTpyopT4mQOetAaSCOxcxsWfpPEZ2H7n4jgDWN9UBBbBOkykd0Hy+ID64X8KrcqO6wwBBqPU=  ;
From: Steve Brooks <prvt_pilot@yahoo.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Remove Turbo
Date: Wed, 14 Jun 2006 17:45:02 -0400
User-Agent: KMail/1.8.2
References: <list-1154347@logan.com>
In-Reply-To: <list-1154347@logan.com>
MIME-Version: 1.0
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Message-Id: <200606141745.03067.prvt_pilot@yahoo.com>

On Wednesday 14 June 2006 02:07 pm, Bulent Aliev wrote:

>
> Hi Steve,
> My stock turbo is OK and resting under the bench. I used an old hot
> section casting and made a 3/16" block-off plate for the back where
> the compressor was. This will be my muffler/exhaust system. Used the
> same pipe with the O2 sensor.
> Now I'm trying to find some kind of a fresh air duct/hose for the
> intake. Scat tubing comes to mind, but I know it is prone to inner
> wall collapse. Any suggestions?
> Buly
>
>
Buly,
I'm using the silicone version of SCAT tubing, which is called SCEET tubing

At any rate, It seems to be pretty rigid, and holds its shape well on bends.  
I'm using it to supply fresh air to the turbo, and haven't had any issues 
with it.  It is not real cheap, but take a look at this link for ACS.

http://www.aircraftspruce.com/catalog/appages/sceet.php

Regards,
Steve Brooks