I seem to recall from the Cozy list that the work around is just to change hardeners.  I forget whether it was MGS335 fast hardener or the MGS285 fast hardener that had the shipping problem.  The consensus was (your mileage may vary) to just use the hardener from the other MGS system.  They are compatible.

 

So, for example, if you are using MGS 335 and the fast hardener was the problem just switch to the MGS 285 fast hardener with the MGS 335 epoxy.

 

Bob

Bob, Something tells me that I read that the two systems are not compatible with eachother. Don't mix until you are certain.

 

The shipping problem is with the MGS 285 fast hardener.

 

Wicks ships (sink ships) both hardeners.

 

Rich