Received-SPF: none
 receiver=logan.com; client-ip=68.142.201.222; envelope-from=prvt_pilot@yahoo.com
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=s1024; d=yahoo.com;
  h=Message-ID:Received:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding;
  b=B71MSwVv/VBOO/CRW4KTcairOmK51W1p83WO7bYBeK994GjJrY+H5X4E3agqAVcRf/8cu5KGrje3nNLKDRl9C+HWetDxhDVl0QRQxp0vjEtPaq6QSS84aEM3YXTpTiZExrUkW337kDiTcouNJQP4ifdJXeWnNOdA/0S1tIIpTpk=  ;
Message-ID: <20060612184942.1175.qmail@web30114.mail.mud.yahoo.com>
Date: Mon, 12 Jun 2006 11:49:42 -0700 (PDT)
From: Steve Brooks <prvt_pilot@yahoo.com>
Subject: Re: [FlyRotary] Re: help from the plastic plane builders
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
In-Reply-To: <list-1151165@logan.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Ernest,

I did all of mine with a 50/50 mixture of fast and
slow hardner.  I did some layups in 90+ temps.  Just
make sure that you don't leave any mixed epoxy
unattended.  Keep it stirred up, and or keep brushing
it in.  At a 50/50 mix, mine still took about 4 hours
to get to the chewing gum stage, and as I recall the
fast, is 2-3 hours to get there.  I don't think that
you'll have any trouble, but if you need any help with
big layups, let me know.

Steve Brooks


--- davidclifford01@comcast.net wrote:

> Try Wicks.  They also usually bring some to Oshkosh
> for the show if you are going, and can pick up the
> MGS there and save on the shipping charges.  If you
> ever go to Toronto or the surrounding area,,,the
> North America distributor is located there and will
> sell retail if you make prior arrangements with them
> (Airheart Distributors).  Good luck.  Dave
> 
> -------------- Original message -------------- 
> From: Ernest Christley <echristley@nc.rr.com> 
> 
> > Sorry to start another non-rotary thread, but I
> need some help. I've 
> > been using MGS epoxy for all of my layups, but now
> Aircraft Spruce isn't 
> > selling the slow hardener any longer. They gave me
> some noise about the 
> > shipping classification being changed, so that it
> now cost a minimum of 
> > $55 to ship the stuff. I don't think I can work in
> 80degree North 
> > Carolina heat with only the fast hardener. I know
> a lot of Cozy builder 
> > have used or are using this particular brand of
> epoxy. Where are you 
> > getting the hardener from? 
> > 
> > -- 
> > ,|"|"|, Ernest Christley | 
> > ----===<{{(oQo)}}>===---- Dyke Delta Builder | 
> > o| d |o www.ernest.isa-geek.org | 
> > 
> > -- 
> > Homepage: http://www.flyrotary.com/ 
> > Archive and UnSub:
> http://mail.lancaironline.net/lists/flyrotary/