Received-SPF: pass
 receiver=logan.com; client-ip=24.25.9.100; envelope-from=eanderson@carolina.rr.com
Message-ID: <000501c68e4c$2bb3a510$2402a8c0@edward2>
From: "Ed Anderson" <eanderson@carolina.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-1151117@logan.com>
Subject: Re: [FlyRotary] help from the plastic plane builders
Date: Mon, 12 Jun 2006 14:15:22 -0400
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=response
Content-Transfer-Encoding: 7bit

Sure you can, Ernest.  Just work faster {:>) - sorry, couldn't help myself, 
the devil made me do it, etc.

Ed

Ed Anderson
Rv-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com
----- Original Message ----- 
From: "Ernest Christley" <echristley@nc.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, June 12, 2006 2:02 PM
Subject: [FlyRotary] help from the plastic plane builders


> Sorry to start another non-rotary thread, but I need some help.  I've been 
> using MGS epoxy for all of my layups, but now Aircraft Spruce isn't 
> selling the slow hardener any longer.  They gave me some noise about the 
> shipping classification being changed, so that it now cost a minimum of 
> $55 to ship the stuff.  I don't think I can work in 80degree North 
> Carolina heat with only the fast hardener.  I know a lot of Cozy builder 
> have used or are using this particular brand of epoxy.  Where are you 
> getting the hardener from?
>
> -- 
>         ,|"|"|,               Ernest Christley     |
> ----===<{{(oQo)}}>===----     Dyke Delta Builder    |
>        o|  d  |o          www.ernest.isa-geek.org  |
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
>