X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from mail19.syd.optusnet.com.au ([211.29.132.200] verified) by logan.com (CommuniGate Pro SMTP 5.0.9) with ESMTPS id 1149368 for flyrotary@lancaironline.net; Sat, 10 Jun 2006 20:58:05 -0400 Received-SPF: none receiver=logan.com; client-ip=211.29.132.200; envelope-from=lendich@optusnet.com.au Received: from george (d58-108-92-238.dsl.nsw.optusnet.com.au [58.108.92.238]) by mail19.syd.optusnet.com.au (8.12.11/8.12.11) with SMTP id k5B0vEoI021571 for ; Sun, 11 Jun 2006 10:57:17 +1000 Message-ID: <008d01c6a872$defdc930$ee5c6c3a@george> From: "george lendich" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: [FlyRotary] Date: Sun, 16 Jul 2006 10:57:53 +1000 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_008A_01C6A8C6.AFE32DD0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 This is a multi-part message in MIME format. ------=_NextPart_000_008A_01C6A8C6.AFE32DD0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Tracy A bit slow to respond, but I had to check an RX8 engine and sure enough = the Throttle-body was 3" not 2.75", and a lovely light throttle body it = is too. George (down under) Nice manifold! I'm going to use the RX8 throttle body on mine. I consider it about = the smallest diameter usable on the 20B (about 2.75"). Virtually = anything between this and 3.25" is fine. Unless you are turbocharging, = anything larger is overkill at the RPMs we are running. =20 As always, YMMV. Tracy ----- Original Message -----=20 From: bmears9413@aol.com=20 To: Rotary motors in aircraft=20 Sent: Monday, May 29, 2006 11:28 AM Subject: [FlyRotary]=20 Is there any particular throttle body that works best for a 20B and = the Tracy's ECM? I've attached pics of the intake manifold I will copy. Bob Mears -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ ------=_NextPart_000_008A_01C6A8C6.AFE32DD0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Tracy
A bit slow to respond, but I had to check an RX8 = engine=20 and sure enough the Throttle-body was 3" not 2.75", and a lovely light = throttle=20 body it is too.
George (down under)
Nice manifold!
 
I'm going to use the RX8 throttle body on mine.  I consider = it about=20 the smallest diameter usable on the 20B (about 2.75").   = Virtually=20 anything between this and 3.25" is fine.  Unless you are = turbocharging,=20 anything larger is overkill at the RPMs we are running. 
 
As always, YMMV.
 
Tracy
----- Original Message -----
From: bmears9413@aol.com
To: Rotary motors in = aircraft=20
Sent: Monday, May 29, 2006 = 11:28=20 AM
Subject: [FlyRotary]

Is there any particular throttle body that works best for a 20B = and the=20 Tracy's ECM? I've attached pics of=20 the intake manifold I will copy.
 
Bob Mears
 
 
--
Homepage:  http://www.flyrotary.com/
Archi= ve=20 and UnSub:   http://mail.lanca= ironline.net/lists/flyrotary/
------=_NextPart_000_008A_01C6A8C6.AFE32DD0--