X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from ms-smtp-03.southeast.rr.com ([24.25.9.102] verified) by logan.com (CommuniGate Pro SMTP 5.0.9) with ESMTP id 1088434 for flyrotary@lancaironline.net; Tue, 02 May 2006 08:25:11 -0400 Received-SPF: pass receiver=logan.com; client-ip=24.25.9.102; envelope-from=eanderson@carolina.rr.com Received: from edward2 (cpe-024-074-025-165.carolina.res.rr.com [24.74.25.165]) by ms-smtp-03.southeast.rr.com (8.13.6/8.13.6) with SMTP id k42COA44023328 for ; Tue, 2 May 2006 08:24:11 -0400 (EDT) Message-ID: <000301c66de3$52d08980$2402a8c0@edward2> From: "Ed Anderson" To: "Rotary motors in aircraft" References: Subject: Exhaust cones was Re: [FlyRotary] Re: new hangar Date: Tue, 2 May 2006 08:24:13 -0400 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=response Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2869 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 X-Virus-Scanned: Symantec AntiVirus Scan Engine Ok, Buly. ----- Original Message ----- From: "Bulent Aliev" To: "Rotary motors in aircraft" Sent: Tuesday, May 02, 2006 8:18 AM Subject: [FlyRotary] Re: new hangar > It's about time you guys changed the Subject line. > Buly > On May 2, 2006, at 8:03 AM, Ed Anderson wrote: > >> How about a source for the more reasonable priced cones, George. I >> obviously don't care about the finish since they will go inside - >> just the material and cost. Thanks >> >> Ed >> ----- Original Message ----- From: "george lendich" >> >> To: "Rotary motors in aircraft" >> Sent: Tuesday, May 02, 2006 12:11 AM >> Subject: [FlyRotary] Re: new hangar >> >> >>> Ed, >>> That's way too dear, you should be able to get them for about $10 >>> US ea. I >>> must admit I had to shop around as well. The ones I ended up with >>> weren't as >>> perfectly finished as the expensive one but the same material 316SS. >>> Our design has an inner cooling tube and an outer cooling tube and >>> heat >>> shield, all the ends are cones as well! >>> All I have to do is get my welder to finish it. >>> George >>> >>> George ( down under) >>> >>>> Sounds like the right formula, George - will wait for your project's >>> outcome >>>> before I try cones. Yes, I did find some cone inserts at $60.00 >>>> USD >>> each. >>>> I would need 4 for my two tubes - hummm makes one tube sound >>>> better all >>> the >>>> time. >>>> >>>> Ed >>>> >>>> ----- Original Message ----- >>>> From: "george lendich" >>>> To: "Rotary motors in aircraft" >>>> Sent: Monday, May 01, 2006 7:48 PM >>>> Subject: [FlyRotary] Re: new hangar >>>> >>>> >>>> > >>>> >> Just the shells, TJ, the 1/8" thick SS washers are history. I >>>> have >>>> >> concluded that no reasonable thickness of metal will stand up >>>> to the >>>> > exhaust >>>> >> pulse for long if it is perpendicular to the shock wave. I >>>> believe >>> that >>>> > if >>>> >> I could shape them into cones where by the shock wave would >>>> hit the >>> side >>>> > of >>>> >> the cone at an oblique angle would probably survive - now >>>> all I have >>> to >>>> > do >>>> >> is find some {:>). >>>> >> >>>> >> Ed >>>> > >>>> > Ed, >>>> > There plenty of SS cones available in 1.6mm, I'm using them in my >>> exhaust >>>> > which is a joint venture design with Bill Jepson - the idea is to >>> redirect >>>> > the shock waves but not restrict the exhaust, as you have >>>> alluded to. >>>> > George ( down under) >>>> > >>>> > >>>> > -- >>>> > Homepage: http://www.flyrotary.com/ >>>> > Archive and UnSub: http://mail.lancaironline.net/lists/ >>>> flyrotary/ >>>> > >>>> >>>> >>>> >>>> -- >>>> Homepage: http://www.flyrotary.com/ >>>> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ >>> >>> >>> -- >>> Homepage: http://www.flyrotary.com/ >>> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ >> >> >> >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ >