X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from [216.211.128.10] (HELO mail-in04.adhost.com) by logan.com (CommuniGate Pro SMTP 5.0.9) with ESMTP id 1062953 for flyrotary@lancaironline.net; Sun, 09 Apr 2006 01:02:53 -0400 Received-SPF: none receiver=logan.com; client-ip=216.211.128.10; envelope-from=joeh@pilgrimtech.com Received: from Pilgrim10 (c-67-183-14-47.hsd1.wa.comcast.net [67.183.14.47]) by mail-in04.adhost.com (Postfix) with ESMTP id 980761114A9 for ; Sat, 8 Apr 2006 22:02:56 -0700 (PDT) (envelope-from joeh@pilgrimtech.com) From: "Joe Hull" To: "'Rotary motors in aircraft'" Subject: Radio Sage - EM2 - a Strange Twist Date: Sat, 8 Apr 2006 22:02:07 -0700 Message-ID: <006701c65b92$c04ccf90$bb02a8c0@redmond.corp.microsoft.com> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0068_01C65B58.13EDF790" X-Mailer: Microsoft Office Outlook 11 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670 Thread-Index: AcZbkr73BpG8qPLfSUqR/iB5COkjDA== This is a multi-part message in MIME format. ------=_NextPart_000_0068_01C65B58.13EDF790 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Today I spent most of the day with my EAA flight advisor - much of it was up in his Long-EZ doing drills for my first flight - which I was hoping to be this next week. However, after that I spent a couple of hours in the hanger puzzling over the radio static that only appears when the engine is running AND the mic is keyed (note - no / little noise on incoming broadcasts whether the engine is running or not). It was windy and rainy this afternoon and I wasn't able to get the plane out of the hanger for an engine run so I thought I'd double check grounds and shielding etc. At some point I had the bright or not so bright idea to use my handheld ICOM to see if there was any radiated signal from the coils or anything else when the engine was not running that might intensify when the engine is running. A very interesting phenomena soon appeared related directly to the EM-2. When the EM-2 is powered on anything attached to grounded metal (remember I have a plastic airplane and thus well defined ground paths) radiates a static noise on the handheld. For example within about 18" of the engine I'll get static; or if I go halfway down the wing and sweep it over the wing I will get static when it passes over the part that contains the rudder cable. If I pull the fuse on the EM-2 I get no static anywhere - not even when I key the mic. I unplugged P1 and P2 plugs (sensor inputs) from the EM-2 and still had static - only get static when there is power to the EM-2. HOWEVER, again, I wasn't able to run the engine so I don't know if the static is gone with the engine running and the EM-2 is disconnected. Joe Hull Cozy Mk-IV #991 (Done Building! In Phase1 Flight Test - 0 hrs flown) Redmond (Seattle), Washington ------=_NextPart_000_0068_01C65B58.13EDF790 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Today I spent most of the day with my EAA flight = advisor – much of it was up in his Long-EZ doing drills for my first flight = – which I was hoping to be this next week. However, after that I spent a couple = of hours in the hanger puzzling over the radio static that only appears = when the engine is running AND the mic is keyed (note – no / little noise = on incoming broadcasts whether the engine is running or not). =

 

It was windy and rainy this afternoon and I = wasn’t able to get the plane out of the hanger for an engine run so I thought = I’d double check grounds and shielding etc.  At some point I had the = bright or not so bright idea to use my handheld ICOM to see if there was any = radiated signal from the coils or anything else when the engine was not running = that might intensify when the engine is running.  A very interesting = phenomena soon appeared related directly to the EM-2.  When the EM-2 is powered on = anything attached to grounded metal (remember I have a plastic airplane and thus = well defined ground paths) radiates a static noise on the handheld. For = example within about 18” of the engine I’ll get static; or if I go = halfway down the wing and sweep it over the wing I will get static when it = passes over the part that contains the rudder cable. If I pull the fuse on the EM-2 I = get no static anywhere – not even when I key the mic.  I unplugged = P1 and P2 plugs (sensor inputs) from the EM-2 and still had static – only = get static when there is power to the EM-2.

HOWEVER, again, I wasn’t able to run the engine = so I don’t know if the static is gone with the engine running and the = EM-2 is disconnected. 

 

Joe Hull

Cozy Mk-IV #991 (Done Building! In Phase1 Flight Test = - 0 hrs flown)

Redmond (Seattle), = Washington

------=_NextPart_000_0068_01C65B58.13EDF790--