|
Re: [FlyRotary] Oil pressure port size
Wendell,
I
purchased an adapter kit (metric to NPT) from local auto parts store under
the name of "HELP".
Help...!!
I ordered an adapter (10.0x1) from
ACS. This is the size I got off this list as to what is needed for the
oil pressure gauge post. Well... it doesn't fit, the threads are finer
on the oil pressure gauge sender unit. Sooo.. what is the real thread
size for the Oil pressure gauge port on the 13B? What is a good source
for an adapter to go from the oil pressure port to pipe thread?
Wendell
I make my own by cutting off the shank
of the stock pressure switch and then drilling and tapping it to 1/8
inch.
Ken
|