Received-SPF: none
 receiver=logan.com; client-ip=68.230.240.33; envelope-from=candtmallory@cox.net
Message-ID: <001001c649ff$e50b9ef0$335c0144@mallorydesktop>
From: "the mallorys" <candtmallory@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-1037525@logan.com>
Subject: Re: [FlyRotary] Re: I've finally started!
Date: Fri, 17 Mar 2006 14:18:03 -0600
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=response
Content-Transfer-Encoding: 7bit

How big can I make the attachment and not have the server moan?

Chris
----- Original Message ----- 
From: "Ernest Christley" <echristley@nc.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, March 17, 2006 2:10 PM
Subject: [FlyRotary] Re: I've finally started!


> the mallorys wrote:
> 
>> Am I messing anything up so far?
> 
> Yes.  You're sending pictures with resolution that is to low.  I suggest 
> you stop airplane construction and buy a higher end digital camera.  How 
> am I supposed to shamelessly rip off your good ideas if you send fuzzy 
> pictures.  Focus, man, FOCUS!!   8*)
> 
> I like your plenum.  It looks like you will have plenty of room for a 
> large filter and a dead air space for the trash to fall down into.  
> Provide an opening on the side large enough to slip a flat filter into 
> and be able to vacuum it out at annual.
> 
> -- 
>         ,|"|"|,               Ernest Christley     |
> ----===<{{(oQo)}}>===----     Dyke Delta Builder    |
>        o|  d  |o          www.ernest.isa-geek.org  |
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/