|
|
Bobby J. Hughes wrote:
I would bet you found the problem. DC power leads should always be run
as a pair. A nice uniform twist is also good but I do not remember how
many twist per foot is recommend.
Twisted pair only reduces noise in signals transmitted THROUGH the wire, and it only works if the receiver uses a differential signal. It doesn't help with power wires. The curious can drop by:
http://www.duxcw.com/digest/Howto/network/cable/cable4.htm
It's a fairly good, brief description of what goes on. You'll usually only find twisted pair in LAN cabling.
Regards,
Chad
|
|