|
I agree. I have Safety-poxy/EZ-poxy tanks. I burn 10% ethanol
every winter, no problems whatsoever.
----------------
I tested the hell out of that. No effect. Years of exposure to
different batches of known alcohol. I understand that if you use a
resin of high proportions of hardener to resin, it's resistant. If you
use 50/50, it isn't. I had 50/50 get soft from fuel exposure.
This info consistent with all the other guys that did the same
test.
It will make it less attractive for
those with fiberglass tanks. Alcohol/gas mixes are more aggressive than
either gas or alcohol alone.
Bill Schertz
KIS Cruiser # 4045
|