Bill;
I think it was probably about ¾”
hole. The unit came with fairly heavy gasket washers for both sides of the
container wall. My container is about 3 ½” dia, and fairly thin walled,
so it did flatten just a bit to help the seal.
Al
-----Original Message-----
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of William
Sent: Thursday, January 12, 2006
3:33 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Radiator Expansion
Tank
Thanks Al, I was looking on McMaster
Carr also, and they all seemed a little bulky. How big a hole was needed in
your reservoir? My reservoir is made of 3"OD aluminum tubing.
Bill Schertz
KIS Cruiser # 4045
----- Original Message -----
Sent: Thursday,
January 12, 2006 12:48 PM
Subject: [FlyRotary]
Re: Radiator Expansion Tank
Subject:
[FlyRotary] Re: Radiator Expansion Tank
What sensor are you using for liquid
level? Source?
Bill
Schertz
Bill;
I
got the sensor from Mcmaster-Carr, but I am unable to find my receipt, and
looking on their web site I was not able to find it. Apparently they no
longer carry it. It mounts in horizontally, but has a 90 degree bend and
magnet/float that moves vertically. It is a magnetic reed switch, made of
blue nylon good to 300+ F.
Sorry
can’t be more specific.
Al