Received-SPF: none
 receiver=logan.com; client-ip=207.69.195.68; envelope-from=duaneservice@earthlink.net
Message-ID: <21035394.1137034153167.JavaMail.root@elwamui-karabash.atl.sa.earthlink.net>
Date: Wed, 11 Jan 2006 21:49:12 -0500 (GMT-05:00)
From: Duane Service <duaneservice@earthlink.net>
Reply-To: Duane Service <duaneservice@earthlink.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Momentary pucker X's 3
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Just a lurker here, but could it have been the shaft in the psru, slipping and rewelding, as just stated on the threads?  Duane Service, Florida

-----Original Message-----
>From: Charlie England <ceengland@bellsouth.net>
>Sent: Jan 11, 2006 6:08 PM
>To: Rotary motors in aircraft <flyrotary@lancaironline.net>
>Subject: [FlyRotary] Re: Momentary pucker X's 3
>
>WALTER B KERR wrote:
>
>>Flying around the neighborhood today and about 30 minutes into flight
>>there was a momentary hic-up. Everything on monitor looked normal, so
>>richened a tad and continued flying. About 5 minutes later, same thing
>>second verse, and then a third time. Went to full power and rich and it
>>did not repeat. No miss while descending to land or while taxing in. Ran
>>up a full static for a minute on the ground and everything appeared
>>normal.
>>
>>Any suggestions???
>>
>>Bernie, not wanting to start to Lakeland with an unknow problem!
>>  
>>
>
>Nothing constructive to offer, but is there a Lyc part hiding under the 
>cowl somewhere?
>
>
>--
>Homepage:  http://www.flyrotary.com/
>Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/