Received-SPF: none
 receiver=logan.com; client-ip=204.127.198.35; envelope-from=techwelding@comcast.net
Message-ID: <003001c614ea$eb078840$9ef93f44@dell>
From: "Ed Klepeis" <techwelding@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-917953@logan.com>
Subject: Re: [FlyRotary] Auto Tune Instructions Not Needed
Date: Mon, 9 Jan 2006 01:04:16 -0600
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit

Dear Bob W
       What kind of cool tube muffler do you have and what does it sound 
like do you have any pic of it. thanks
                                                                             
                         Regards
                                                                             
               Ed Klepeis
----- Original Message ----- 
From: "Bob White" <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, January 08, 2006 5:35 PM
Subject: [FlyRotary] Auto Tune Instructions Not Needed


>
>> Hi Bob,
>>
>> You'll need some instructions for sure, or one of us will have to look it 
>> up
>> for you.  I haven't done it, but I believe you have to set the EM-2 up in
>> the real time MAP viewing mode, then do something to tell it to start
>> autotuning.  I'll be reading that later this afternoon myself, and can 
>> send
>> you the instructions later if needed.
>>
>> Rusty
>>
>>
>
> Hi Rusty,
>
> OK, I've been studying my manuals.  The auto tune instructions are
> there in the latest EM2 manual that I have.  I upgraded the EC2, but I
> think that was for the primer feature instead of auto tune.  Thanks for
> the offer.
>
> Bob W.
>
>
> -- 
> http://www.bob-white.com
> N93BD - Rotary Powered BD-4 (first engine start 1/7/06)
> Custom Cables for your rotary installation -
> http://www.roblinphoto.com/shop/
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/