|
|
Thanks Bob,
I realised my mistake just after I hit the send button.
Do you think you could track it down from your sources. The RX8 fitting is,
Kelly advises, the same as the 1999-2002 Mazda Protege and the1993-95 RX7.
I would say that a lot of people might use the RX8 timing wheel, if they
could source everything.
George ( down under)
Hi George,
I think you meant Bob White so I'll respond. :) I don't recognize the
connector from the picture.
Bob W.
On Sun, 4 Dec 2005 17:48:42 +1000
"george lendich" <lendich@optusnet.com.au> wrote:
> Kelly,
> I was hoping to buy one ( connector) off the shelf, without having to
chase around wreckers for one.
> I wonder if Bill White can source these - Bill are you there?
> George ( down under)
> George,
> Do you mean the 2 pin connector of the sensor........That is the
> connector (along with a pigtail of wire for splicing) from the donor
> auto that I suggested.......
>
> --
> Kelly Troyer
> Dyke Delta/13B/RD1C/EC2
>
>
>
>
>
>
> -------------- Original message from "george lendich"
<lendich@optusnet.com.au>: --------------
>
>
> Kelly,
> What I really need is the connector for the 2 pin plug - any ideas.
> George ( down under)
> Ken,
> This is what you are looking for !!
> --
> Kelly Troyer
> Dyke Delta/13B/RD1C/EC2
>
>
>
>
>
>
> -------------- Original message from keltro@att.net (Kelly
Troyer): --------------
>
>
> Ken,
> Hit the junkyards........1999-2002 Mazda Protege "Camshaft
Sensor"
> is the same part number as the 1993-95 RX7 eccentric shaft
sensor....
> Rock Auto price had best price of $81.00 that I found.......Get
the
> connector from the donor car harness with the sensor !!
> --
> Kelly Troyer
> Dyke Delta/13B/RD1C/EC2
>
>
>
>
>
>
> -------------- Original message from
kenpowell@comcast.net: --------------
>
>
> Kelly,
> I need one of these too plus the pickup. I'll be really
interested in what you find.
>
> Ken Powell
> Bryant, Arkansas
> 501-847-4721
> C150 / RV-4 under construction
>
>
>
>
--------------------------------------------------------------------------
>
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub:
http://mail.lancaironline.net/lists/flyrotary/
>
--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (Projected engine start - maybe next week)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|