X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from mail23.syd.optusnet.com.au ([211.29.133.164] verified) by logan.com (CommuniGate Pro SMTP 5.0.3) with ESMTPS id 862054 for flyrotary@lancaironline.net; Sat, 03 Dec 2005 16:17:15 -0500 Received-SPF: none receiver=logan.com; client-ip=211.29.133.164; envelope-from=lendich@optusnet.com.au Received: from george (d58-105-159-11.dsl.nsw.optusnet.com.au [58.105.159.11]) by mail23.syd.optusnet.com.au (8.12.11/8.12.11) with SMTP id jB3LGMIx008214 for ; Sun, 4 Dec 2005 08:16:26 +1100 Message-ID: <000b01c5f84e$d37820d0$0b9f693a@george> From: "george lendich" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: Renisis Timing Plate Date: Sun, 4 Dec 2005 07:16:27 +1000 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0008_01C5F8A2.A4576AF0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 This is a multi-part message in MIME format. ------=_NextPart_000_0008_01C5F8A2.A4576AF0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Kelly, I will put measurements on it you like and reproduce it as a snapshot = (GIF) if that's what you want. A DXF will probably transfer to another = format. I thought you might have wanted to get it laser cut, for that the = AutoCAD would have been ideal. Sending soon. George ( down under) George, I cannot use Autocad but I am sure someone in the group here in the = states can take it and come up with a scale drawing guys like me can use !! Thanks George, -- Kelly Troyer=20 Dyke Delta/13B/RD1C/EC2=20 -------------- Original message from "george lendich" = : --------------=20 Kelly/ Tracy, I have that on AutoCAD 4 if you need it. It would need to be modified ( perhaps) if used on another set-up, = as the bottom bolt hole is off-set, so as you don't inadvertently put it = around the wrong way (on the RX8). Unless they do that with some RX7 components as well - it's a good = safety point. George ----- Original Message -----=20 From: Tracy Crook=20 To: Rotary motors in aircraft=20 Sent: Saturday, December 03, 2005 3:21 PM Subject: [FlyRotary] Re: Renisis Timing Plate No, but they look very easy to copy. I can gen-up a drawing if = needed. Tracy ----- Original Message -----=20 From: Kelly Troyer=20 To: Rotary motors in aircraft=20 Sent: Friday, December 02, 2005 2:07 PM Subject: [FlyRotary] Renisis Timing Plate Tracy, Have you been able to source the Renisis ignition timing = plate=20 without the complete hub assembly ?? I need one !! -- Kelly Troyer=20 Dyke Delta/13B/RD1C/EC2=20 ------=_NextPart_000_0008_01C5F8A2.A4576AF0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Kelly,
I will put measurements on it you like = and=20 reproduce it as a snapshot (GIF) if that's what you want. A DXF will = probably=20 transfer to another format.
I thought you might have wanted to get = it laser=20 cut, for that the AutoCAD would have been ideal.
Sending soon.
George ( down under)
George,
   I cannot use Autocad but I am sure someone in the = group here=20 in the states
can take it and come up with a scale drawing guys like me can use = !!
 
Thanks George,
--
Kelly Troyer
Dyke=20 Delta/13B/RD1C/EC2




--------------=20 Original message from "george lendich" <lendich@optusnet.com.au>: = --------------

Kelly/ Tracy,
I have that on AutoCAD 4 if you need = it.
 
It would need to be modified ( perhaps) if = used on=20 another set-up, as the bottom bolt hole is off-set, so as you don't=20 inadvertently put it around the wrong way (on the RX8).
 
Unless they do that with some RX7 components = as well -=20 it's a good safety point.
 
George
----- Original Message ----- =
From:=20 Tracy = Crook=20
To: Rotary motors in = aircraft=20
Sent: Saturday, December = 03, 2005=20 3:21 PM
Subject: [FlyRotary] Re: = Renisis=20 Timing Plate

No, but they look very easy to copy.   I can gen-up = a=20 drawing if needed.
 
Tracy
----- Original Message ----- =
From: Kelly=20 Troyer
To: Rotary motors in = aircraft=20
Sent: Friday, December = 02, 2005=20 2:07 PM
Subject: [FlyRotary] = Renisis Timing=20 Plate

Tracy,
    Have you been able to source the Renisis = ignition timing plate
without the complete hub assembly ?? I need one !!
--
Kelly Troyer =
Dyke=20 Delta/13B/RD1C/EC2



------=_NextPart_000_0008_01C5F8A2.A4576AF0--