Received-SPF: none
 receiver=logan.com; client-ip=204.127.198.35; envelope-from=rlwhite@comcast.net
Date: Thu, 1 Dec 2005 09:02:41 -0700
From: Bob White <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: EM2 question / progress report (lack of)
Message-Id: <20051201090241.7637962f.rlwhite@comcast.net>
In-Reply-To: <list-852938@logan.com>
References: <list-852938@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi Tracy,

Thanks.  Keeping documentation straight is one of the hardest things
there is to do.

Bob W.

On Thu, 1 Dec 2005 10:18:41 -0500
"Tracy Crook" <lors01@msn.com> wrote:

> Hey Bob, Let me take this opportunity to belatedly get back to you on you=
r question about the EM2 instructions.  This applies only to the two part v=
ersion, not the integrated single module version. =20
>=20
> The confusion was on P2 pin 11 which is called out as +5 for Aux air temp=
 #2 sensor in one place and "not used" in another.  The first reference was=
 correct for the 2 module version.  I have corrected this in the documentat=
ion and thanks for pointing it out. =20
>=20
> This pin is used for a different purpose (EC2 serial data link) on the si=
ngle module version.
>=20
> Tracy Crook  (no lack of lateness here either)
>   ----- Original Message -----=20
>   From: Bob White<mailto:rlwhite@comcast.net>=20
>   To: Rotary motors in aircraft<mailto:flyrotary@lancaironline.net>=20
>   Sent: Wednesday, November 30, 2005 10:05 PM
>   Subject: [FlyRotary] Lack of progress report
>=20
>=20
>=20
>   Any of you who have read my signature would know that I was trying to
>   get my engine started by today at the latest.  It didn't happen.  I
>   have a long list of excuses, but I won't bore you with them. :)
>=20
>   I am still plodding along on the wiring.  Once that's done, all that's
>   left is to tighten up some hoses, add fluids, do some system checks, and
>   give it a try.
>=20
>   From the land of ma=F1ana,
>   Bob W.  (Sorry I'm not making some noise!)
>=20
>=20
>   --=20
>   http://www.bob-white.com<http://www.bob-white.com/>
>   N93BD - Rotary Powered BD-4 (Projected engine start - maybe next week)
>   Custom Cables for your rotary installation -
>   http://www.roblinphoto.com/shop/<http://www.roblinphoto.com/shop/>
>=20
>   I won't have to change this one till the engine is running. :)
>=20
>   --
>   Homepage:  http://www.flyrotary.com/<http://www.flyrotary.com/>
>   Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/<htt=
p://mail.lancaironline.net/lists/flyrotary/>
>=20


--=20
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (Projected engine start - maybe next week)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/